Honing Sleeve Single Pass Honing Tools Integral Sintering Sleeve
The single stroke honing tool is also known as a single pass honing tool that incorporates a super abrasive sleeve mounted on a tapered mandrel for precision bore sizing and finishing. Each individual piece of this diamond tool is designed to be matched with corresponding honing machines. According to differences in the bore diameter, customers can choose from our existing models of honing tools, or customize a new honing tool.
The single stroke honing tool works for finishing bores at a minimum of Φ2mm, and is all equipped with thrust pads. In addition, depending on honing and finishing processes, this bore finishing tool come in four types: vertical honing tool, horizontal honing tool, vertical cylinder honing tool, and horizontal cylinder honing tool. Specific product descriptions are as follows.
straight groove
spiral groove
Honing machine
workpiece information:
Final dia after honing 30.12 + 0.01
Before honing dia 30.06
Ra0.4
Through bore
Cast iron
Bore length 180 mm
Hydraulic housing
Vertical machining centre
Low volume production
recommind tool:
mandrel: JHG-6/30.12-160/180
sleeve: P1-30.12-D181
P2-30.12-D181
P3-30.12-D151
P4-30.12-D76
P5-30.12-D46
P6-30.12-D25
